Published 4 min read By Wolf Smart Industries
Short answer
A smart home without rewiring means automating an existing home without opening up the walls. Small modules installed behind the light switches and in the fuse box let you control lights, blinds, gates, heating and cooling, and energy use from your phone and by voice. The wall switches keep working as usual and, in Portugal, a one-bedroom home starts at around €1,000.
For many years, a smart home meant running new cables and chasing channels into the walls. That is no longer the case: most automation is now done with wireless modules that fit inside the switch boxes you already have.
How a smart home without rewiring works

A typical installation has three parts:
- Modules behind the switches and in the fuse box. We use Shelly modules, which sit hidden inside the switch box or in the fuse box. They switch lights on and off, raise and lower blinds and measure energy use.
- A router dedicated to the home automation. The devices run on their own Wi-Fi network, separate from the household network, with extenders where the home needs them. If you change internet provider, nothing changes: you just connect this router to the new provider’s router.
- The controls. The official Shelly app for Android, iOS and desktop, plus voice assistants: Amazon Alexa, Google Home and Apple Home.
What you can automate
- Lighting: lights that switch on by schedule, by presence or by voice, with scenes for every moment.
- Blinds and gates: blinds that open with the sun and gates you open from your phone, wherever you are.
- Heating and cooling: air conditioning, underfloor heating and ventilation switched on before you get home.
- Energy management: see in real time where your energy goes and get alerts before the bill arrives.
- Security: smoke, flood and motion sensors that alert your phone and act on their own.
- Businesses and industrial buildings: scheduled lighting, energy, climate control and gates in offices, restaurants, hotels and industrial buildings.
Everyday examples
- Night mode: “Alexa, turn on night mode” can switch off the lights, lower the blinds and close the gate in one go.
- Leaving home: one tap switches off everything that was left on.
- Air conditioning with the window open: a window sensor switches the air conditioning off while the window is open.
- Water leak: a sensor detects water on the floor and alerts your phone, wherever you are.
What home automation costs in Portugal
The price depends on what you want to control. As a guide, a smart home in a T1 (one-bedroom) property starts at around €1,000, including the router dedicated to the home automation. From there, the price grows with the number of devices:
| What drives the price | Why |
|---|---|
| Light points | Each lighting circuit you control uses one channel of a module |
| Blinds and gates | Each motor needs its own module |
| Heating and cooling | Depends on the system: air conditioning, underfloor heating, ventilation |
| Energy monitoring | Meters in the fuse box |
| Sensors | Smoke, water, motion, windows |
| Size of the home | Larger homes may need Wi-Fi extenders, included in the price |
To get a figure for your home, the quote calculator asks what you want to automate and emails you an estimate within a few minutes. The final price is confirmed during the technical visit, which is free.
Energy savings depend on each home and its habits, so we don’t promise a percentage. What monitoring does is show where energy goes and cut waste: appliances left on, air conditioning running with the window open and consumption outside normal hours.
How long it takes
In an existing home, the automation is ready, turnkey, in less than a week. The exact timing depends on the number of devices and is confirmed after the technical visit. At the end, we leave the scenes set up and show you how to use the app.
What happens if the internet goes down
The wall switches keep working as usual and the schedules stored on the devices keep running. Without internet you only lose remote access through the app and voice control, until the connection comes back.
Existing home or new build
- Existing home: a smart home without rewiring is the simplest option, with modules behind the switches and in the fuse box.
- New build or renovation: we plan the automation with the electrician from the start, so everything is ready.
- Apartment blocks and houses for sale: for developers and builders, we install home automation in every unit, at a fixed price per property type, handed over ready for the buyer.
Who installs it in Braga, the Minho and Porto
Wolf Smart Home is the home automation brand of Wolf Smart Industries and an official Shelly installer in Braga. We handle the design, installation, set-up and support for homes and businesses in Braga, the Minho and Porto. One example is the automation of the entire Factory Braga building.
About the author
About the author
Wolf Smart Industries
Wolf Smart Industries is a software engineering company based in Braga, Portugal, founded in 2021. It builds custom software, apps and applied AI for businesses in Portugal and Switzerland, and installs home automation under the Wolf Smart Home brand. It is recognised by ANI, the Portuguese National Innovation Agency, as a technology company.
Meet the team